Worthington, OH Heating & Cooling Repair and Installation Company
Local Reviews
for Worthington, OH
Our Reviews by City
very efficient, friendly service
Linda - Worthington, OH 43085
arrived on time, listened to the problem and went to work fixing it. also gave some tips to home owner which were much appreciated.
Furnace checkup
Mike - Worthington, OH 43085
Yearly furnace checkup by Wally. All went smoothly.
Great service
Jan - Worthington, OH 43085
Great tech! Explained options. Very courteous. Repaired the problem. He’s also great with my pitbull great Dane.Josh is a great person.
Response from Sears Heating & Cooling:
Thanks so much for the review!
great service
Jacob - Worthington, OH 43085
Wally is a good service man .Send him again the next service call
Response from Sears Heating & Cooling:
Thank you for the review!
Great service!
SW - Worthington, OH 43085
Joel was friendly and knowledgeable.
Response from Sears Heating & Cooling:
Thank you for your review!
Quick Turnaround
Aaron - Worthington, OH 43085
Furnace stopped working yesterday (Sunday). Came home early today to do some troubleshooting. On the phone with Nest as I was getting an error message. Unable to fix it with them. Called Sears and Joel was here within 90 minutes. Found the issue quickly and explained the numerous ways a furnace can shut itself down. Had me back up and running within an hour. 15 year old furnace will probably need replaced sooner rather than later and I’ll be calling Sears.
Response from Sears Heating & Cooling:
Thanks so much for the great review of your furnace repair! We will show this to Joel!
Great maintenance.
Mike J - Worthington, OH 43085
Had a check up for my HVAC. Tech arrived promptly. He checked out the system. All was good. Walter was very courteous.
Response from Sears Heating & Cooling:
Thank you for the review on your furnace tune up!
Ramon R.
Performed maintenance and safety, check on air handler and heat pump
Ramon R.
Perform heating, check on air handler and heat pump
Joel T.
Furnace safety inspection all systems operating at this time.
Ramon R.
Performed furnace maintenance on Rheem furnace. Diagnosed Failing humidistat for humidification system
Ramon R.
Furnace Service - Completed furnace, maintenance and safety. Check on Bryant unit.
Jamie S.
Cost to install furnace. Furnace has cracked heat exchanger.
Jamie S.
Gave cost to replace furnace and air conditioning. Cost to install furnace and install air conditioning.
Robby D.
Performed yearly maintenance and safety checks on 2005 Armstrong system. Customer opted to replace furnace 20254 filter as well as 10 Wp. Humidifier is in proper working order. Found burner assembly rusted out corroding and missing chunks of metal. Picture uploaded. Cleaned flame sensing system. Found secondary heat exchanger failing as well. 400+ ppm in flue. Red tagged and rendered unit unoperational via switch on floor joist. Called for pricing and availability for heat exchanger presented hm53. Special order part from factory. Customer on schedule for quote for new system.
Josh S.
2005 trane 80% 2 stage with humidifier
Ramon R.
Performed furnace maintenance and safety check on Bryant unit
Joel T.
Furnace safety inspection all systems operating at this time.
Ramon R.
Diagnosed failed inducer motor on York furnace
Austin L.
Completed annual maintenance on a 2011 Bryant heat pump. All electrical, mechanical and safety components of the system check out at this time. During testing of the units the technician found the voltage distribution system within the outdoor unit to show signs of pitting. Customer stated we will take care of this concern come spring time as he doesn’t use the house much throughout winter. No issues at time of departure.
Austin L.
Completed annual maintenance on a 2017 Bryant furnace. All electrical, mechanical, and safety components of the system check out at this time. During testing of the unit the technician found no electrical protection device for the furnace. Technician presented options hb7a-e. Customer stated they will talk it over with their significant other and get back with the office if they decide to move forward with the install. Technician replaced customer provided 213 filter. Customer opted for humidifier service today. Technician verified successful operation and drainage of the humidification system, set humidity levels at 35%, and replaced 10 water panel. No issues at time of departure.
Ramon R.
Performed furnace maintenance and safety check on Bryant unit
Ramon R.
Performed furnace maintenance and safety check on Bryant unit
Ramon R.
Performed furnace maintenance and safety check on Atlas Butler unit
Ramon R.
Performed furnace maintenance and safety check on comfort maker unit
Robby D.
Responded to no heat situation found thermostat calling for heat furnace cycled on properly without fault or concern check carbon monoxide in flue 38 ppm found termination clear of leaves and other tree particles. Running with 60 degree delta t. Allowed to run for several minutes. Found peg from thermostat broken in backplate. Maybe cause of no heat. Removed peg stat seems operational at this time
Robby D.
off upon arrival. Found system showing code 2 for pressure switch. Found roughly 30 rocks inside flu pipe. Not allowing proper airflow shitting system off on pressure switch. Cleared flu pipe cycled furnace. System cycled on properly without issue. 0ppm co in supply. 31 ppm co in flu.
Austin L.
Completed annual maintenance on a 2015 Rheem furnace. All electrical, mechanical and safety components of the system check out at this time. During testing of the unit the technician found no electrical protection device for the furnace. Technician presented options sh8a-e and hb7a-e. Customer stated she will do research on the product and get back with the office if she decides to move forward with the install. Technician did not replace air filter due to filter having much life left. No issues at time of departure.
Austin L.
Completed annual maintenance on a 2017 Bryant furnace. All electrical, mechanical and safety components of the system check out at this time. Technician replaced both 213 air filter and 35 water panel covered under service contract, and set humidity level at 35%. Customer interested in iwave air cleaner. Customer will fill out application online to see about qualifying for six month financing. No issues at time of departure.
Austin L.
Completed annual maintenance on a 2017 Bryant furnace. All electrical, mechanical and safety components of the system check out at this time. Technician replaced both 213 air filter and 35 water panel covered under service contract, and set humidity level at 35%. Customer interested in iwave air cleaner. Customer will fill out application online to see about qualifying for six month financing. No issues at time of departure.
Wally T.
Replaced failed low voltage fuse on a Rheem furnace
Austin L.
Completed annual maintenance on a 2011 Trane heat pump. All electrical, mechanical and safety components of the system check out at this time. Upon arrival customer gave concern about thermostat not reading room temperature correctly. Technician verified thermostat reading was correct via thermometer. Customer opted for humidifier service today. Technician verified successful operation of humidifier, replaced 35 water panel, and set humidity settings at 35%. No issues at time of departure.
