Sears is proud to be the dependable name in Reynoldsburg, OH for everything heating and cooling related. Our highly-skilled professionals have what they need to tackle any job, diagnose any problem and complete any repair. Your comfort is our number one priority.
Find out why we’ve been held in such high esteem since we were founded in 1950. Read reviews from the good folks of Reynoldsburg, OH below.
Local Reviews
for Reynoldsburg, OH
Our Reviews by City
Great service
Jim M - Reynoldsburg, OH 43068
Joel showed up on time and took care of my air conditioner. He told me there was a problem and got it fixed up fast. The unit is working well right now.
Robby D.
Customer claims there was a power outage a week or so ago. Had issues reconnecting cable and Wi-Fi. Once issue got resolved customer attempted to reconnect Wi-Fi stat. Stat connected but when calling for heat cold air coming from vents. Found voltage getting sent to g terminal instead of w terminal. Disconnected stat and jumped wires furnace fired up properly without fault. Proper voltage being sent to furnace. Thermostat from AEP. Customer still has t6 from ac install we did in 2021. Sh3a to replace with supplied stat. Customer accepted. Cycled furnace. No concerns at this time.
Robby D.
Completion Notes: Edit Completion Notes Performed yearly maintenance and safety checks on 2018 Bryant air-conditioning system. Cleaned coil on condenser. Replaced 213 filter. Found 45/5 voltage absorption system reading 44.6/4.5. Unit has hard start kit. 69 LRA. surge protection installed on system. No concerns found at this point in time.
Robby D.
Performed yearly maintenance and safety checks on 2020 comfortmaker 80% downflow furnace. Found 67 RA115 SA48 degree deltat. Customer opted to not have humidifier coverage at this time. Found no sign on gas leak inside mechanical room. 17 ppm co in flu 0 in supply. Cleaned flame sensor. Found 50 ohms on ignition system. 16254 filter customer maintains. Co alarm in mechanical room with furnace and HWT. Informed customer of surge and purification systems. Customer is not interested at this point in time
Robby D.
HVAC Service and Furnace Repair - Performed yearly maintenance and safety checks on 2019 comfortmaker 90% furnace. Found furnace running with 8.5% o2. 5 ppm co in flu. 0 in supply. With 95 degree stack temp. 81 RA 126 SA 44 degree delta t. Found voltage absorption system rated 15. Reading 15. 58 ohms on ignition system. Replaced 16251 filter. Informed. Customer of surge purification and humidification accessories. Customer is not interested at this time.
Austin L.
Completed annual maintenance on a 2002 Rheem furnace. All electrical, mechanical and safety components of the system check out at this time. During testing of the unit the technician found no electrical protection device for the furnace, the voltage enhancement system being outside of manufacturers specifications, and a few spots on flu that show signs of breakdown although still solid at this time. Technician presented options Hn10a-e. Customer chose option C. Technician replaced voltage enhancement system and installed electrical protection device. Technician successfully cycled unit after repairs were complete. Technician recommended customer get CO detectors within the house as she has none. No issues at time of departure.
Austin L.
Completed annual maintenance on a 2018 Bryant furnace. All electrical, mechanical and safety components of the system check out at this time. During testing of the unit the technician found no electrical protection device for the furnace. Customer stated she is not interested at this time, but will re-address the concern come spring time and most likely have both indoor and outdoor units to have the electrical protection device installed. Technician applied service sticker to return duct. No issues at time of departure.
Robby D.
Heat Pump Repair - Upon calling for confirmation for Availability customer stated it was having same symptoms as before got ballparked price for cleaning . Upon arrival customer stated it was operational and lineset was hot. Stated he wants to get it cleaned to start. Presented options Hk3a-e. Customer chose option A. Cleaned coil and cycled system. System cycled properly every time. Ran with 18 degree delta t. Heat pump only. 43 degree delta t with aux running. No issues at this time.
Robby D.
Found metal scrapping upon arrival. Found fan wheel dismembered from fan blades. Quoted hc18 a-e customer chose option a. Retrieved and replaced part. Started furnace. Furnace cycled on properly and ran within manufactures specifications 4ppm co in flu 0 in supply
Robby D.
Returned to complete diagnostic on 2010 heat pump system. Was frozen solid. Found reversing valve receiving 24 constant volts. When making call for heat heat pump ran in cooling mode. Presented options hh25 a-e for heat pump thermostat replacement.customer wanted to opt for paying full price and keeping furnace and ac check, Bryan on vacation per office, technician needs to proceed with previous agreement. Technician and office advised customer to call back to speak with Bryan about moving forward. Customer chose option a. Retrieved proper thermostat and installed. Ran equipment test through heating, fan and em heat. All systems cycled on properly and in correct mode before departure. 24 degree delta t hp.20 degree delta t. Em heat. No further concerns at this time. Technician Collected option a with 10% discount as instructed
Robby D.
Returned to complete diagnostic on 2010 heat pump system. Was frozen solid. Found reversing valve receiving 24 constant volts. When making call for heat heat pump ran in cooling mode. Presented options hh25 a-e for heat pump thermostat replacement.customer wanted to opt for paying full price and keeping furnace and ac check, Bryan on vacation per office, technician needs to proceed with previous agreement. Technician and office advised customer to call back to speak with Bryan about moving forward. Customer chose option a. Retrieved proper thermostat and installed. Ran equipment test through heating, fan and em heat. All systems cycled on properly and in correct mode before departure. 24 degree delta t hp.20 degree delta t. Em heat. No further concerns at this time. Technician Collected option a with 10% discount as instructed.
Robby D.
Rechecked system to find heat pump compressor frozen solid. As well in inside coil. Can not diagnose heat pump while frozen. Will need to return Friday to see if ice has thawed customer will call shop to discuss sc and pricing for future. Paid 79 today. Switched to em heat and set to 64 per customer. 15 kw heat strips 3 circuits pulling 20 amps each 25 degree delta t. No further concerns at this time
Austin L.
No heat on a 2021 Bryant furnace. Upon arrival technician found control board to be throwing code 13, limit circuit lock out. Technician inspected the air filter and found it to be completely clogged with dirt. Technician replaced air filter and cycled unit successfully. Technician found gas pressure to be out of the specifications. Technician presented options hk8a-e. Customer chose option a. Technician completed repairs and cycled unit successfully. 58° temperature rise, oxygen percentage 11.5%, CO69ppm, 0ppm in plenum, No issues at time of departure.
Robby D.
Performed d yearly maintenance and safety checks on 3 systems. Following notes are for each system individually. Unit #1 2017 comfortmaker. System is running properly and within manufacture specifications. Service Club Safety & Performance Furnace Tune Up Check Stat. Does unit come on?:yes Does the customer have any IAQ products?: no Did you change the filter?: yes What is the filter size?: -20251 What is the MFG date? - 2017 Is the ignition system working properly?: yes Are the burners lighting correctly?: yes What is the Temperature Rise?: - 65 Carbon Monoxide in flue:: - 23 Carbon Monoxide in plenum:: - 0 What is the flue temp? - 384 Are there any visible cracks in the Heat Exchanger?: no Is Furnace venting correctly?:yes Is the pressure sensing system working properly?:yes Gas valve manifold pressure - Check air movement system operation?:yes Did you clean or replace the flame sensing system?:yes Did you check the vent for rust or cracks?:yes Does the Customer have a Humidifie
Robby D.
Performed yearly maintenance and safety checks on 2016 carrier 80% downflow furnace. Found no sign of gas leak via electronic leak detector.70 RA 123 SA. 53 degree delta t. Manufacture specification read 30-60. Changed 14251 filter. Adjusted gas pressure accordingly. Main return in hallway. Has layer of dust advised customer to sweep it clean to increase airflow. Quick disconnect switch on front of furnace, appears to be able to be flipped unintentionally. Customer has co/smoke detectors installed. No concerns at this time.updated equipment details.
Robby D.
Performed yearly maintenance and safety checks on 2013 Bryant downflow 80% furnace. System is operating properly with one concern being leak in shut off to fuel delivery system. Shut off can be operated without a tool, up to current codes. Leak is in testing port plug. Offered SH3A TO address leak and leak check. Customer accepted. Applied bigblu to joint proceeding repair. No sign of leak at this point in time. No further concerns at this time
Austin L.
Completed a furnace check on a 2002 Bryant furnace. All electrical, mechanical and safety components of the system check out at this time. During testing of the unit the technician found the air circulation system to have dirt buildup within the system, the ignition system read just within manufacture specifications, as well as no electrical protection device for the furnace. Customer stated she was just trying to get through the winter and will most likely buy a new unit next year due to age of the furnace. No issues at time of departure
Austin L.
Completed annual maintenance on a 2016 Rheem furnace. All electrical, mechanical and safety components of the system check out at this time. Customer opted for humidifier service today. Technician verified successful operation of the humidifier and replaced 35 water panel. No issues at time of departure
Austin L.
Completed annual maintenance on a 2016 Rheem furnace. All electrical, mechanical and safety components of the system check out at this time. Customer opted for humidifier service today. Technician verified successful operation of the humidifier and replaced 35 water panel. No issues at time of departure.
Robby D.
Performed yearly maintenance and safety checks on 2017 comfort maker 80% furnace left new 16251 filter. Found rusted corroded wye. Informed customer of issue and presented issue with customer. Presented Sh3a o replace wye as rest of flue pip has very minimal damage. Customer accepted and technician performed repair. Cycled system to ensure operation. System is currently running upon departure.
Austin L.
Completed annual maintenance on a 2010 Rheem furnace. All electrical, mechanical and safety components of the system check out at this time. During inspection of the unit the technician found slight dirt buildup around the air circulation system. This is not a large concern at this time but something to monitor moving forward. Technician spoke to customer about adding air humidification system to house due to large amounts of wood furniture and large piano in dining room. Customer stated they do not plan to be at the house much longer and declined at this time. Technician collected $198 service contract renewal. No issues at time of departure.
Robby D.
Performed yearly maintenance and safety checks on 2021 Bryan down flow 80% furnace system is operating properly and within the manufacture specifications at this time with no cause for concerns. Left new 1225 one filter
Robby D.
Performed yearly maintenance and safety checks on 2016 Rheem 90% furnace system is operating properly and within manufacturer specifications at this time. However technician found IDM to be hot to touch and clicking sounds intermittently coming from motor while running. Informed customer , customer would like to hold off on repair at this time and will wait until failure.
Robby D.
Performed yearly maintenance and safety checks on 2021 Bryant system. System is operating properly and within me Effexor specifications at this time with no cause for concerns customer stated upon arrival Columbia Gas had sell for new nest thermostat customer currently has nest thermostat that states it is not keeping charge he has to disconnect from wall And manually charge thermostat. Not interested in having done today due to not wanting charge today will call us back to have new stat installed
Robby D.
Customer explain to technician back to offices don’t heat or cool as well as the rest of the building. One bigger office one smaller office bigger office has dome lit star lighting Plexiglass on ceiling with 1” gap between glass and frame. Several holes on wall showing daylight does not seem to be insulated one register in both offices no return grills in either. 1” supply in smaller office. Customer was interested in adding another register to both rooms informed customer that would entail ductwork upgrade as well as possible furnace upgrade. Advised customer to get insulation in attic and in walls checked double check windows to make sure energy efficient. And get domelight looked at and more energy efficient.issues may resolve problem once home is more energy efficient we can better examine issue following. Also informed of ductless systems we can install in both or either room furnace is running properly with 62 degree temp rise. Customer also stated she keeps doors to office is sh
Robby D.
Performed yearly maintenance and safety checks on 2019 Bryan 80% furnace. System is operating properly and within manufacturer specifications at this time technician did observe one cause for concern being flu pipe pitched towards furnace. Added strap to pipe to correct pitch for customer no further concerns at this time
