Broken Furnace Need Fixing? Trust The Experts
Fast, Honest Furnace Repair in Columbus, OH
When your furnace quits in the middle of a Columbus winter, you need a technician who can find the real problem and fix it right the first time. Sears Heating & Cooling has handled furnace repair in Columbus since 1950. Our trucks carry common furnace parts, so most repairs are finished in a single visit.
From German Village to Worthington, Dublin, Powell and Westerville, we’re ready when your heat isn’t. If you’re facing a no-heat night, our emergency HVAC repair team can help.
Need furnace repair in Columbus today? We answer 24/7-Call 614-475-1800 or contact us online.
Signs You Need Furnace Repair in Columbus
Many different things can cause a furnace breakdown. Here are 10 common reasons Columbus homeowners call us:
- No heat at all. A bad thermostat, a failed ignitor or an ignition problem can stop your furnace from heating.
- Not enough heat. The furnace runs but the house stays cold. A clogged filter or a weak blower motor is often to blame.
- Strange noises. Banging, rattling or squealing can point to a worn blower motor, inducer motor or loose part.
- Short cycling. A furnace that turns on and off over and over wastes energy. A dirty flame sensor or a thermostat problem is a common cause.
- High energy bills. A sudden jump in your gas bill with no change in use can mean your furnace is losing efficiency.
- Uneven heating. Some rooms are much colder than others, which can mean duct or airflow problems.
- A yellow burner flame. A healthy flame is blue. A yellow flame can mean a gas mixture problem and should be checked right away.
- Frequent repairs. If you call for repairs every winter, regular care through our HVAC service club can help prevent breakdowns.
- A carbon monoxide alarm. Get everyone outside first and call 911 or your gas company. Then call us to find the cause.
- Old age. Most furnaces last 15–20 years. Older units break down more often and cost more to run.
The parts we repair most often include blower motors, heat exchangers, inducer motors, circuit boards, ignitors and flame sensors. For quick things to check before you call, see our HVAC troubleshooting tips or our guide to the 5 signs your furnace needs repair.
What We’re Seeing in Columbus Homes This Fall
Our recent service calls show the same problems again and again:
- Cracked heat exchangers in Dublin, Lewis Center and Columbus, including a 40-year-old furnace in Lewis Center. A cracked heat exchanger can leak carbon monoxide, so it’s never something to put off.
- Failed blower motors in Westerville and Columbus. Often the first clue is a new hum or squeal when the furnace starts.
- Circuit board failures. In Upper Arlington, one furnace lost both its circuit board and motor, and replacement parts were six weeks away.
- Rusted flue pipes on older furnaces tucked into crawlspaces.
Did another company tell you your heat exchanger is cracked? We’ll give you a free second opinion. And if a repair no longer makes sense, we’ll walk you through your furnace replacement options honestly, with financing available.
Furnace Repair FAQs
A furnace service call will typically cost in the range of $49 - $99. This cost will be dependent on:
- Expertise - A bigger, more professional company may charge more.
- Timing - After hours and weekend calls may cost more.
Get the most out of your service call cost by choosing a furnace service company that will perform your furnace repair, installation or maintenance with five star service--Sears Heating & Cooling. And if you need a second opinion on a broken AC compressor or a cracked heat exchanger, it’s FREE.
Maintaining your furnace in the fall is crucial to ensure it operates efficiently during the colder months. A fall furnace maintenance check helps identify any potential issues before they become major problems, reducing the risk of a breakdown during the winter. Regular maintenance also improves your furnace’s energy efficiency, saving you money on your heating bills. Additionally, a well-maintained furnace ensures better indoor air quality and extends its lifespan. Scheduling a professional tune-up in the fall keeps your furnace running smoothly and your home comfortable all season long.
A properly maintained furnace should prevent you from experiencing a costly repair. As soon as you notice a potential issue, contact us instead of putting it off until it becomes worse. It can ultimately save you from a more costly repair in the end. Some common signs that you may be in need of a repair include:
- The smell of gas in your home – A gas smell could indicate a problem with your furnace’s gas valve.
- Strange noises when the furnace is running – Your furnace has different moving parts and as these parts age, noises become more common.
- Not heating the home effectively – If your furnace is not keeping your home at the temperature you have your thermostat set to, it may be shutting off prematurely.
- The furnace will not turn on at all – Sometimes the unit may not come on at all due to a power issue.
Check out our HVAC troubleshooting tips for some quick help!
There are many factors that will influence how much your new furnace costs in Columbus. A new furnace can typically be installed for between $5,000–$7,000 depending on brand, size and efficiency.
Sears Heating & Cooling would like to help you out. Take advantage of HVAC financing options as well as any available rebates. Call for more information: 614-475-1800.
Your average 20-year-old furnace is extremely inefficient. Not only has technology improved, but old HVAC systems do not work as well as they originally did.
Want to save on your energy bills and avoid unexpected breakdowns? Then you might want to replace that old furnace sooner rather than later. Check out our page on helpful tips for buying a new furnace.
Yes, furnaces lose efficiency as they age. They run for longer just to provide the same amount of heat. This translates to high energy bills and an increased risk of breakdowns.
Need a furnace replacement? Our experienced HVAC techs can help you determine that answer. Give us a call today at 614-475-1800.
The most common furnace problems include ignition issues, where the furnace fails to start due to a malfunctioning pilot light or ignition system. Clogged air filters are another frequent issue, restricting airflow and causing the furnace to overheat or work inefficiently. Thermostat malfunctions can lead to incorrect temperature readings or inconsistent heating. Worn-out belts or blowers can cause unusual noises and reduce the furnace's efficiency. Additionally, cracked heat exchangers are a serious issue, potentially leading to dangerous carbon monoxide leaks.
No. A cracked heat exchanger can let carbon monoxide into your home. If a technician finds one, turn the furnace off and make sure your CO detectors are working. Sears Heating & Cooling offers a free second opinion on cracked heat exchangers, so you can be sure before you spend money on a repair or a new furnace.
In most cases, yes. Our trucks carry common furnace parts like ignitors, flame sensors and capacitors, so many repairs are finished on the first visit. Some brand-specific parts, like certain circuit boards, may need to be ordered. If that happens, we’ll tell you how long it will take and talk through your options.
Yes. We provide furnace repair across central Ohio, including Dublin, Powell, Westerville, Worthington, Hilliard, Upper Arlington, Lewis Center and Delaware. Call 614-475-1800 to schedule.
Why Trust Sears Heating & Cooling for Your Furnace Repair
When your furnace goes down in a Columbus winter, who you call matters. Furnace repair isn't just swapping a part — it involves gas lines, electrical components, and combustion systems where a wrong diagnosis can mean a safety hazard, not just a cold house. That's why Columbus homeowners have trusted Sears Heating & Cooling with their heating systems since 1950.
Here's what stands behind every furnace repair we perform:
- Family-owned and Columbus-based since 1950. Three generations of central Ohio heating experience means we've seen every furnace problem this climate can produce, from cracked heat exchangers in aging homes to flood-damaged blower motors and circuit boards.
- Licensed and factory-trained technicians. Our techs attend regular seminars and certification classes to stay current on modern gas furnace and heat pump technology. As an award-winning Bryant dealer, we're held to manufacturer standards on every job.
- Honest diagnosis, upfront pricing. We diagnose the real problem before we quote anything, and you approve the price before we turn a wrench. If a repair no longer makes sense, we'll tell you honestly — and back it with a free second opinion on cracked heat exchangers and failed components.
- Safety first, always. A malfunctioning furnace can leak carbon monoxide or become a fire risk. Our technicians check combustion, the heat exchanger, and ventilation on every repair, so your family stays safe as well as warm.
The Sears Furnace Repair Process
Every furnace repair follows the same careful process, whether it's a no-heat emergency or a strange noise you want checked before winter sets in:
- Thorough diagnosis. Our technician inspects the full system — ignition, heat exchanger, blower motor, flame sensor, thermostat, and gas and electrical connections — to find the true cause, not just the symptom.
- Clear explanation and upfront pricing. We show you what's wrong and what it will cost before any work begins, so you can decide with the full picture in front of you.
- Same-visit repair when possible. Our trucks carry common furnace parts, so most repairs are completed on the spot.
- Honest repair-versus-replace guidance. If your furnace is aging or the repair is significant, we'll walk you through whether a furnace replacement is the smarter long-term investment — never a pushy upsell.
The best furnace repair, of course, is the one you never need. Regular maintenance through our HVAC service club catches small issues before they leave you without heat on the coldest night of the year, and our heating system replacement options are always available when the time comes. Whatever your furnace needs, one call to Sears gets it handled right.
Need furnace repair in Columbus today? Call 614-475-1800 or schedule online
